APM - LZOS Apo 304mm/3600mm CNC-LW II Model
LZOS is building a new company to make the raw material for there Apos themself. So the Apos with size 203 mm and more can´t be ordered before end of 2015.
The first tube was designed and manufactured by our artist, Matthias
Wirth, in cooperation with APM Telescopes.
The tubes are made in Germany with non-compromising mechanical quality.
The dew cap slides smoothly over the tube without producing any paint
scratches. The focuser is a full 3.5" size. It rotates smoothly and with
zero image shift. This zero shift rotation is very important when your
camera has already achieved its best focus and you would like to rotate
it to the best position. The finder bracket has a quick exchange style
screw system and is mounted on the rotatable focuser, which allows
focuser rotation to bring the finder scope to the most comfortable
observing position. The focuser comes with large anodized focuser knobs
and moves extremely smooth when racking. The focuser comes with a
screwed on 3.5" / 2" adapter and an 2" / 1 1/4" clamp ring style adapter
to protect your eyepieces and diagonals from scratches.
The tube rings are flat on both sides and offer five tapped 1/4 inch
holes perpendicular to the tube line with one centered. The middle two
hole's center to center spacing is 2.362" and outer two hole's
spacing is 3.2" (Astro-Physics standard).
Customers should suggest
their own unique wishes regarding the tube's construction - we will
to the extent possible.
Delivered With Order:
3.5" Starlight focuser
Set CNC tube rings
2" extension 80 mm long
50mm finder bracket
A powerful apochromat for visual observing at highest magnifications and astrophotography using, made for your requirements.