APM - LZOS Apo 100/800 CNC-LW II
The optics are the same as those of the 100-800-T-2.5ZTA and 100-800-T-3ZTA models. The difference: The focuser is a 3.5 "FeatherTouch from Starlight Instruments. The sturdy aluminum tube is high-quality lacquered, the cover construction inside is optimized and closes with a cover in the dew cap. This also prevents dew on the optics.
The optical design, a high-quality triplet with ED glass, has long been tried and tested. The quality of the image, which incidentally corresponds to a minimum standard of a Zeiss APQ, is underpinned by the massive cell construction and high-quality multi-coating. The LZOS engineers have put all their knowledge into the calculation and manufacture of these optics, you can see that too! An interferometric test report is enclosed with the optics to substantiate this.
The extension is of course rotatable and has a 1:10 micro reduction. Even demanding, heavy accessories are held securely and precisely. The maximum illumination is increased again, with the optional flatteners and reducers, very wide fields of view can be realized on the sensor. Reducing adapters 3 "-2" and 2 "-1.25" are available for the adaptation.
This optic has an excellent visual resolution and offers color correction at the highest level. Thanks to its lightweight construction and retractable dew cap, the 100/800 CNC LW II is a top travel telescope for discerning amateurs!
Scope of delivery:
• Optical lightweight CNC tube with movable dew cap
• Set of CNC clamps
• 3.5 "Starlight extension with mounted 50 mm finder bracket, both can be rotated through 360 °
• Reducer adapter 3.5 "/ 2" with new, fully encompassing eyepiece clamp
• extension 2" -80 mm
• Adapter 2 "/1.25" with brass clamping ring
• Test protocol
• Covers on both sides
We also offer aluminum transport cases with pre-milled rigid foam shells for all CNC tubes.
A compact and lightweight but powerful apochromat for visual and astrophotography using.