APM TSE17 A4 SOLAR FILTER FILM

100% SAFE AND CERTIFIED - Meets the requirements for filters for direct observation of the sun to DIN ISO 12312-2: 2015

• Suitable for making your own solar filters for telescopes, binoculars, still and video cameras or solar eclipse glasses
• Protection by using material made of black polymer
• Provides a very natural orange-yellow solar image
• Constant brightness and neutral density with any aperture
• Light weight – will not cause balance issues
• Extremly flat surface in comparison with other thin filter films that will easily develop wrinkles and creases
• Very resistant to damage

IMPORTANT

Never look at or near the sun without a tested
solar protection filter. The solar filter must be installed on the
objective lens, not on the eyepiece lens! Because of the light beam, the
filter film would be destroyed and eye damage or even complete
blindness would be the consequence. Check the solar filter before each
solar observation to ensure it is undamaged. Children must be under
constant supervision. Never leave the optics unattended. Take frequent
breaks (every 3 minutes) when oberserving the sun. Do not look at the
sun after an eye operation or other eye ailment. Make sure the self-made
solar filter fits exactly and has safe hold. Do not expose the solar
filter film to high temperatures for a long time.

MAINTENANCE & CLEANING

Clean the foil only if it is absolutely neccessary!
For cleaning use a lint-free and soft cloth and moisten it with a
little water. Then clean the foil very carefully and without pressure.

Delivery with:

• Solar Filter Film