TS Optics filter drawer for mounted low profile 2" filters for TS filter quick changers
Additional filter drawer for the TS filter quick changer allow for changing between different filters within seconds. There is no limit to the number of different filters you can use and it is even possible to mix 1.25" and 2" drawers if needed! Thus you can use any filter combination photographically or visually.
The filter drawer is suitable for all 2" filters, especially for filters with a "low-profile" filter cell up to 6.5 mm height. The 2" filter thread is not taken into account.
The length of the female thread is 4 mm.Equipping
We recommend one drawer for each filter. Interchanging of filters during photography or observation is rather impractical.
the drawer is only slightly bigger than the filter, it is almost
unreachable with the fingers. It is much easier with a 2" barrel (of an
eyepiece or adapter) to which the filter is attached by using a little
bit of adhesive tape. The male M48 thread has to be free. Now screw the
filter carefully into the drawer, using the 2" barrel as extension knob.
Allows changing filters within seconds by using the TS filter quick changer