TS-Optics CNC Aluminium Tube Rings for telescopes with 114mm diameter

 CNC tube rings with elegant design and uncompromising quality from TS Optics


A beautiful telescope should be attached to the mount with the finest
tube ring. Here, a beautiful appearance is as important as good
technical properties. The CNC tube rings from TS meet these
requirements.

• 
  
  The tube is attached to the mount or the dovetail via a largely dimensioned (80 mm)  support surface.
  
• 
  The rings have identical support surfaces on top which allows attaching dovetail clamps or another dovetail bar.
  
• 
  The rings can be folded open, thus the telescope can be removed from them within seconds.
  
• 
  A thin layer of felt was applied to the inner side of the rings. This
  prevents from scratches. Nevertheless, the telescope tube is clamped
  very well in the rings and does not change position. This is important
  if a guiding scope is attached to the rings.

• 
  2x aluminium CNC tube rings