Stable GP Level Dovetail Bar by TS with long bores
This dovetail bar is suitable even for heavy telescopes where simple profile bars start to vibrate. Through the smooth side profile, you can easily balance the telescope by shifting.
Two long bores at the ends of the bar with 25 mm length and two long bores lengthwise of the bar with 78 mm length all countersunk at the downside for cylinder head screws enable
different adaptions. A flat installation surface makes a perfect support of the telescope.
Among others the dovetail bar fits to:
Range of applications
Vixen GP and SX mounts
Skywatcher EQ3 to EQ5 and H-EQ5
several Vixen level saddle plates
photo tripods (via the 1/4" thread)
Via the 1/4" photo thread in the middle of the bar, you can easily attach the bar to your photo tripod or tripod head. Thus you can quickly adapt your telescope to a photo tripod, provided that the tripod is stable enough.
With a suitable dovetail clamp, you can build dual mounts or side-by-side mounts for astrophotography.
Solid dovetail bar with long bores for cylinder head screws and 1/4" photo thread