TS short 1.25" Star Diagonal Mirror for Imaging Star APOs

TS short 1.25" Star Diagonal Mirror for Imaging Star APOs

The 1.25" star diagonal allows observation with many apos of the TS Imaging Star series by using 1.25" eyepieces.

Short 1.25" Star Diagonal Mirror for visual observation with Imaging Star apo telescopes
Imaging Star apos from Teleskop Service are optimised for photography. The distance from camera connector to focus is too small for using standard 1.25" or 2" star diagonals. However, the TSIS-ZS1 with its consequently short design makes observing possible. It only needs about 60 mm optical path. You can unproblematically get into focus with all 1.25" eyepieces.

The adaption to the Imaging Star apo:

• To then Imaging Star apos TSAPO102Q and TSAPO130Q, the star diagonal is attached just instead of the M48 camera adapter. Prior to this, you have to remove the 65 mm thread adapter of the star diagonal, as it is not used.
• If you want to use the star diagonal with the Imaging Star Apo TSAPO81Q, you need the conversion adapter TSIS-M48. Here, you have to remove the 65 mm thread adapter, too.
•  If you want to use the star diagonal with the Imaging Star Apo TSAPO71Q, you need the 65 mm thread adapter. After removing the rotation adapter from the focuser of the apo, you can screw the star diagonal directly into the female 65 mm thread of the apo.

In the box:

• 1.25" Star Diagonal Mirror with dovetail ring
• Connection adapter with 65 mm thread and 360° rotation

TS short 1.25" Star Diagonal Mirror for Imaging Star APOs