TS Canon EOS M48-adapter with filter quick changer - optical length 9 mmSuitable for unmounted filter glasses with 36, 50 and 50.4mm diameter
The TS Optics filter drawer for Canon EOS cameras is M48 ring and filter
drawer in one. You can use your DSLR camera like before but you now have
the option to add a full size filter without altering the back focus.
The filter can be exchanged without touching the camera!
Adaptation to correctors and telescopes through 2" filterthread (M48x0.75)
If the camera's original IR cut filter has been removed, a separate IR filter can be used
You can insert contrast enhancing filters like UHC, Deep Sky Nebula filters
Enhanced RGB imaging is possible by using narrow-band color filters
At the telescope side, the filter drawer has a female M48-thread. With the
optical length of 9 mm plus 1 mm for the steel spacer, the same length
as a standard M48 ring is achieved.
Many correctors have a relatively long M48-thread that may intrude the
filter drawer and possible cause problems with the filter change. Here,
we used the 1mm spacer to prevent this problem.
Suitable unmounted filters
Two drawers are offered for the filter changer: one for 36mm filters and
one for 50 / 50.4 mm filters. For APS-C cameras, 36mm filters are
sufficient so the smaller TSO-TSFES36 can be used. For full size DSLR
sensors, we recommend the TSO-TSFES50.
M48 ring for filter drawer
One filter drawer for 50mm unmounted filters
Suitable for unmounted filter glasses with 36, 50 and 50.4mm diameter